IBM Tivoli and Cisco manual Network Configuration

3.Select Network Configuration in the main menu. The screen in Figure 7-15is shown.

Figure 7-15 Network Configuration

Note: Figure 7-15changes depending on your interface configuration. If you are using Network Device Groups (NDGs), after you click Network Configuration in the main menu, only the Network Device Groups table and Proxy Distribution Table information appear. If you are not using NDGs, the

AAAClients table and the AAA Servers table appear in place of the Network Device Groups table.

4.(Optional) Select Add Entry under Network Device Groups (Figure 7-15).

5.(Optional) Add the name of the NDG you wish to use (for example, switches) and the RADIUS key used by the AAA clients that makes up this NDG (for example, cisco123).

232Building a Network Access Control Solution with IBM Tivoli and Cisco Systems