IBM Tivoli and Cisco manual Cca Oob Vg, Part III Remediation server

Action		Notes	Reference
	Installing the	Highlights the steps for	7.2.1, “Installing CCA
	Clean Access	installing the Clean Access	Agent” on page 304
	Agent	Agent
	Configuring a	Highlights all the steps to	7.2.2, “Configuring a
	CCA OOB VG	configure the CAM and	CCA OOB VG server”
	server	CAS for a Out-Of-Band	on page 306
		Virtual Gateway server
		deployment
	Configuring Cisco	Switch configuration and	“Configuring Cisco 3750
	3750 switch for	verification for Clean	switch for NAC
	NAC Appliance	Access OOB VG	Appliance” on page 352
		deployment
Part III - Remediation server
Install base Tivoli		This solution assumes	IBM Tivoli Configuration
Configuration Manager.		usage of already existing	Manager Version 4.2.3
		Tivoli Configuration	Planning and
		Manager server. Detailed	Installation Guide,
		steps required were not	GC23-4702-03
		described in this book. For
		the installation and
		configuration instructions
		refer to the product
		documentation.
Install Tivoli Configuration		This describes the	8.2.2, “Tivoli
Manager Web Gateway.		installation of the	Configuration Manager”
		prerequisites and Tivoli	on page 359, and IBM
		Configuration Manager	Tivoli Configuration
		Web Gateway component	Manager Version 4.2.3
		on top of the base Tivoli	Planning and
		Configuration Manager	Installation Guide,
		installation.	GC23-4702-03
Install and configure		This section describes the	8.2.4, “Installation of the
remediation package		setup of the WebSphere	Software Package
Web server.		application named	Utilities” on page 394
		SoftwarePackageServer,
		which is the interface
		between remediation
		handler on the client and
		Tivoli Configuration
		Manager Web Gateway
		server.

90Building a Network Access Control Solution with IBM Tivoli and Cisco Systems