Cyclades User's Guide manual Additional Configuration Tasks, To Set Up a Preconfigured KVM/net

Additional Configuration Tasks

TTo Set Up a Preconfigured KVM/net

Perform the tasks shown in the following table with a KVM/net that has been preconfigured as described in“To Preconfigure the KVM/net” on page 104. After the tasks are completed in the order shown, a remote administrator can bring up the Web Manager by entering the KVM/net’s fixed IP address in a browser.

	Task	Where Documented
1	Set up the AlterPath KVM/net.	“Setting Up the KVM/net” on page 75
2	Make an Ethernet connection.	“Making an Ethernet Connection” on
		page 77

3Connect computers and other devices.

4Power on the KVM/net and connected devices.

“Connecting Servers to the KVM Ports” on page 78

“Powering On the KVM/net and Connected Devices” on page 83

Additional Configuration Tasks

See the following sections for other procedures.

Task	Where Documented/Notes
Disabling Mouse Acceleration	“Disabling Mouse Acceleration” on page 106
Required Security Settings For Internet	“Required Security Settings For Internet
Explorer	Explorer” on page 109
Assigning Your Own TCP Viewer Port	“TCP Ports” on page 20
Address

Installation 105