Cyclades User's Guide manual To Configure Local User 1 and User 2 Sessions

	Configuration
Table 4-5:IP Users form parameters
Field Name	Definition
Idle Timeout (min)	Sets the maximum time (in minutes) for the session to be idle
	before it is closed. The default value is 3 minutes. The maximum
	value is 60 minutes. A value of 0 disables the idle timeout.
TCP Viewer Ports	Change the number of the TCP port used for the AlterPath Viewer.
	[IP Users only.] The default is 5900+. You may need to change the
	default, for example, if your firewall is blocking port 5900. (For
	more details, see “TCP Ports” on page 20.) Port numbers 1-1024

are reserved. Indicate a range of ports by entering a plus sign (+) after the first port number (as in 2500+) or by entering a dash between two port numbers (as in 2500-2501). Indicate a set of nonadjacent port numbers by separating port numbers with commas (as in 2500, 2508).

IP Security

Escape Sequences

Sets a desired encryption option. User can select no data encryption, encrypt keyboard/mouse data only, or include video encryption to the keyboard/mouse data. Another option allows 3DES encryption method implemented on a video session.

Redefine the common escape sequence portion of each hot key, which allow administrators to perform common actions while connected to KVM ports.

TTo Configure Local User 1 and User 2 Sessions

Perform this procedure if you want to redefine the parameters that apply to KVM port sessions when a local user is directly logged in to the KVM/net.

1.In Expert mode, go to Configuration>KVM>General>.

2.To configure parameters for the User 1 port, select the User 1 tab.

3.To configure parameters for the User 2 port, select the User 2 tab.

Web Manager for Administrators 179