Cyclades User's Guide manual To Add a Syslog Server Wizard

Wizard Mode

The following table has links to the procedures for adding and deleting a syslog server.

To Add a Syslog Server [Wizard]	Page 158
To Delete a Syslog Server [Wizard]	Page 159

Use this form to configure system logging for the KVM/net. More advanced configuration of syslog servers and event notification can be done in Expert mode. To configure system logging for messages relating to KVM ports, in Expert mode go to “To Configure Syslogging for KVM Ports and Specify Message Filtering [Expert]” on page 232.

TTo Add a Syslog Server [Wizard]

This procedure assumes you have the following information:

•The IP address of the syslog server

•The facility number for messages coming from the KVM/net

1.In Wizard mode, go to “Step 4: System Log.” The System Log form appears.

2.From the Facility Number drop-down list, select the facility number.

3.In the New Syslog Server field, enter the IP address of a syslog server, and select the Add button. (Repeat this step until all syslog servers are listed.)

4.The new server(s) appear in the Syslog Servers list.

5.Click “apply changes.”

158 AlterPath KVM/net Installation, Administration, and User’s Guide