Cyclades User's Guide manual To Configure Group Authorization on a Radius Server

Configuration

Figure 4-28:Radius Server Authentication Form

2.Fill in the form according to your local setup of the RADIUS server or servers.

3.Click “Done.”

4.Click “apply changes.”

The changes are stored in /etc/raddb/server on the KVM/net.

TTo Configure Group Authorization on a RADIUS Server

1.On the server, edit /etc/raddb/users and add a new string attribute (ATTRIBUTE Framed-Filter-Id 11) similar to the following example.

groupuser1

Auth-Type= Local, Password =”xxxx”

Service-Type=Callback-Framed-User,

Callback-Number=”305”,

Framed-Protocol=PPP,

Framed-Filter-

Id=”group_name=<Group1>[,<Group2>,...,<GroupN>];”,

Fall-Through=No

If the Frame-Filter-Id already exists, just add the group_name to the string starting with a colon “:”.

218 AlterPath KVM/net Installation, Administration, and User’s Guide