Cyclades User's Guide manual To Make a PPP Connection From a Remote Computer

Modem Connections

9.Type the username for accessing the KVM/net in the “Username” field.

10.Type the password for accessing the KVM/net in the “Password” and “Confirm Password” field and click “Next>.”

11.Click the “Finish” button.

The “Connect connection_name” dialog appears.

12.Click the “Cancel” button.

The name of the connection appears on the Network Connections” list.

13.To configure call back, do the following steps.

a.Select the name of the connection from the Network Connections dialog box.

b.Select “Dial Up Preferences” from the “Advanced” menu.

The “Dial-up Preferences” dialog box appears.

c.Click the “Callback” tab.

d.Click “Always call me back at the number(s) below.”

e.Highlight the name of the modem and click “Edit.” The “Call Me Back At” dialog box appears.

f.Enter the phone number of your local modem in the “Phone number:” field, and click OK.

TTo Make a PPP Connection From a Remote Computer

Perform this procedure on a remote computer that has a modem to initialize a dial up and optional call back session on the KVM/net. This procedure assumes a PPP connection for dial up or call back has previously been created as described in “To Configure a PPP Connection on a Remote Computer” on page 347.

Note: The following steps work if you are on a computer running Windows XP. The steps are different on computers running other Windows versions or other operating systems, but you can use these steps as an example.

348 AlterPath KVM/net Installation, Administration, and User’s Guide