Cyclades User's Guide manual To Add a Chain, To Edit a Chain

Configuration

Firewall Configuration Procedures

The following table has links to the procedures for defining packet filtering:

To Add a Chain	Page 240
To Edit a Chain	Page 240
To Edit a Rule for IP Filtering	Page 241
To Add a Packet Filtering Rule	Page 242

TTo Add a Chain

1.Go to Configuration>Network>Firewall Configuration in Expert Mode. The IP Filtering form appears.

2.Click “Add.”

The “Add Chain” dialog box appears.

3.Enter the name of the chain to be added in the “Name” field and then click OK.

Spaces are not allowed in the chain name. The name of the new chain appears in the list.

4.Finish defining the chain by adding one or more rules, as described in to “To Add a Rule for IP Filtering” on page 244.

TTo Edit a Chain

Perform this procedure if you want to change the policy for a default chain.

240 AlterPath KVM/net Installation, Administration, and User’s Guide