Cyclades User's Guide manual Access Wizard, 6Network Settings in Wizard Mode

Wizard Mode

Figure 4-6:Network Settings in Wizard Mode

3.If the “DHCP” check box is not checked, enter the network information in the fields.

4.Click the “apply changes” button.

Note: If you change the KVM/net’s IP address and apply the changes, you will need to reconnect to the Web Manager with the new IP address.

5.Press the “Next” button or select “Step 3: Access” from the left menu.

Step 3: Access [Wizard]

In Wizard mode, selecting “Step 3: Access” brings up a form for adding or deleting users and for setting or changing passwords. Use this form if you want to add user accounts to allow other administrators to administer connected devices without being able to change the configuration of the KVM/net. The administrator can configure added users to administer the KVM/net by assigning them to the “admin” group.

Web Manager for Administrators 151