Cyclades User's Guide manual Setting Up the KVM/net

Setting Up the KVM/net

Table 2-1:Shipping Box Contents, Part Numbers, and Description (Sheet 3 of 3)

5	Item	P/N	Description	Purpose
		HAR0220	2 - Mounting	Use to mount the KVM/net to
			brackets with 8 -	a rack or wall. See “To
			screws (2 spares	Mount the KVM/net” on
				page 76.

When ordering the KVM/net, customers also order one KVM Terminator for each server to be connected to one of the KVM ports. The number and types of KVM Terminators in each order are based on the number of KVM ports on the KVM/net model that is being shipped and on the types of servers that are to be connected to the KVM ports. For details, see “KVM Terminator Usage and Types” on page 58.

Note: For more information about cabling, see “RS-232 Cabling Tutorial” at http:// www.cyclades.com/resources.” For ordering information, see “Cyclades Product Guide,” available at: http://www.cyclades.com/common/www/pdf/ catalog.en.pdf.

Setting Up the KVM/net

You can mount the KVM/net on a rack or place it on a desktop or other flat surface. Two brackets are supplied with sixPhillips screws for attaching the brackets to the KVM/net for mounting.

•If you are not mounting the KVM/net, place the KVM/net on a desk or table.

•If you are mounting the KVM/net, obtain a Phillips screwdriver and appropriate nuts and bolts before starting the following procedure.

The following graphics depict the orientation of the brackets for front mounting the KVM/net.

Installation 75