Cyclades User's Guide manual To Use the wiz Command to Configure Network Parameters

Performing Basic Network Configuration

Note: Changing the default password closes a security hole that could be easily exploited.

1.Enter the passwd command.

[root@ KVM/net /]# passwd

2.Enter a new password when prompted.

New password: new_password

Re-enter new password: new_password

Password changed

TTo Use the wiz Command to Configure Network Parameters

1. Launch the Configuration Wizard by entering the wiz command.

[root@ KVM/net /]# wiz

2.At the prompt, enter n to change the defaults.

Set to defaults (y/n)[n]: n

3.Press Enter to accept default hostname, otherwise enter your own hostname.

Hostname [ KVM/net]: boston_branch_kvm

4.Press Enter to disable DHCP.

Do you want to use DHCP to automatically assign an IP for your system? (y/n)[n]: n

5.Enter a public IP address to assign to the KVM/net.

System IP[192.168.160.10]: public_IP_address

86 AlterPath KVM/net Installation, Administration, and User’s Guide