Cyclades User's Guide manual Enables or disables direct access to KVM ports from the Web, 3389

Configure Menu Overview

Table 7-5:General Configuration Screens [OSD] (Continued)

Screen	Description
Direct Access	Enables or disables direct access to KVM ports from the Web
	Manager login screen.

TCP Port Viewer	Allows you to assign an alternate TCP Port number or numbers
	for the AlterPath Viewer to use [Default, 5900+]. Use the plus
	sign (+) to increment the port number by 1 for each additional
	AlterPath Viewer. For example: 5903+ means that the first
	AlterPath Viewer uses port 5903 and the second uses port 5904.
	Use the hyphen (-) to indicate a range of addresses, for
	example, 5903-5907. Use the comma (,) to separate two TCP
	port addresses, for example, 5901,5903. Combine commas and
	hyphens, as desired, for example: 1901,5903-5905,5907.
	Note: Do not use reserved port numbers 1 through 1024.
TCP RDP Ports	Specify the TCP ports or a range of TCP ports to be used for
	RDP (in-band) server connections.
	You must have at least eight valid TCP ports specified in order
	to have up to eight simultaneous in-band connections through
	the KVM/net.
	For example, if you want ports 3389 to ports 10000 to be used,
	type “3389 - 10000”. If you want to use ports 3389 and higher,
	type “3389+”. If you want to use ports 3389 and below, type
	“3389-”.
	You can request valid TCP ports from your network
	administrator.

Note: The Save button on every screen saves configuration changes into the configuration files. To permanently save the configuration changes, you must select Save/Load Conf. from the Configuration Menu.

364 AlterPath KVM/net Installation, Administration, and User’s Guide