Cyclades User's Guide manual Number Label Function Color/Status, Vid

Activity LEDs on the Back of the KVM/net

The LED numbers in the tables below correspond to the numbers in the previous figure.

Table 1-2:LED Descriptions

Number	Label	Function	Color/Status
1	VID	Monitor KVM CAT5	Orange - Lights when an internally-
	EN	video interface	generated signal is used. This occurs
			when the user is not connected to the
			port and in the OSD, or when the user is
			connected to a port, but a video signal is
			not present from the server.
			Green - Lights when the server's video
			signal is used; this happens when the
			server is presenting a valid signal.
2	SYN	Monitor KVM CAT5	Green - Lights when the user is
		video interface	connected to port and a video signal is
			detected and "synchronized". This
			means that the KVM is presenting the
			signal to the station.
			Orange - Lights when the video signal
			level is detected but not synchronized.
			Typically, this takes a very short amount
			of time (less than 1/3 second) for the
			KVM to synchronize to the server's
			video signal upon first connection.
5, 3	LK	Monitor RS-232 async	• OFF – Indicates the port is not open.
		port status	• Orange – Lights when DTR (data
			terminal ready) signal is on (when the
			port is open).
4, 5	ACT	Monitor RS-232 async	• OFF – Indicates no data activity.
		activity	• Green – Blinks when data is either
			being received (RX) or transmitted
			(TX).

12 AlterPath KVM/net Installation, Administration, and User’s Guide