Cyclades User's Guide manual Lockout Macro, Task Where Documented/Notes

Security

screen display) for selecting an authentication method and specifying an authentication server (when needed).

The following table lists the tasks necessary for specifying authentication methods using the Web Manager and the OSD:

Table 1-19:Tasks: Specifying Authentication Methods

Task	Where Documented/Notes
Choosing an authentication method	• Web Manager – “To Configure an
for the KVM/net	Authentication Method for KVM/net Logins”
	on page 206
	• OSD – “Notification Screens” on page 411
Choosing an authentication method	• Web Manager – “To Configure an
for the for all KVM ports	Authentication Method for KVM/net Logins”
	on page 206
	• OSD – “General Configuration Screens [OSD]”
	on page 362
Configuring a remote authentication	If configuring any authentication method other
server	than Local, an authentication server must be set up
	for that method.
	• Web Manager – “Configuring Authentication
	Servers for Logins to the KVM/net and
	Connected Devices” on page 208
	• OSD – “Notification Screens” on page 411

Lockout Macro

This feature is configurable on each KVM port. It allows the KVM connected servers to automatically switch to locked state when the AlterPath Viewer is closed or an idle time-out occurs.

In addition, when a user tries to access a KVM connected server with a full or read-write permission, the lockout macro command is sent to the server to lock the current user and display the new login window.

Introduction 49