Cyclades User's Guide manual To Configure IP User KVM Over IP Sessions Expert

Configuration

Note: The User 1 and User 2 forms are identical except that User 1 modifies the User 1 port options, while User 2 modifies the User 2 port options.

4.To change the idle timeout, enter a different number of minutes in the “Idle Timeout” field.

5.To change the screen saver timeout, enter a different number of minutes in the “Screen Saver Timeout” field.

6.To change the keyboard type, select a different keyboard from the “Keyboard type” drop-down list.

7.To change the cycle time, enter a different number of seconds in the “Cycle Time” field.

8.To change any of the command key portions of KVM hot key combinations, enter a different letter in the “Quit,” “Power Management,” “Mouse/Keyboard Reset,” “Video Control,” “Switch Next,” “Switch Previous,” or “Port Info” fields.

9.Click “apply changes.”

TTo Configure IP User (KVM Over IP) Sessions [Expert]

Perform this procedure if you want to redefine the parameters that apply to KVM port sessions when a remote user is connected through the Web Manager (in a KVM over IP session).

1. Go to Configuration>KVM>General>IP Users in Expert mode.

180 AlterPath KVM/net Installation, Administration, and User’s Guide