Cyclades User's Guide manual Static Routes, To Add, Edit, or Delete a Static Route

Configuration

3.Enter the new or modified host address in the IP Address field and the host name in the Name field.

4.Click the OK button.

5.To delete a host, select the host you wish to delete from the Host Table form, and select the Delete button on the form.

6.Select “apply changes” to save your configuration to Flash.

Static Routes

The Static Routes form allows you to manually add routes. The Routing Table defines which interface should transmit an IP packet based on destination IP information. Static routes are a quick and effective way to route data from one subnet to another.

TTo Add, Edit, or Delete a Static Route

1.In Expert mode, go to: Configuration>Network>>Static Routes.

The Static Routes table form appears.

Figure 4-37:Static Routes Configuration Form

2.Do one of the following:

•To edit a static route, select a route from the Static Routes form, and click the Edit button.

264 AlterPath KVM/net Installation, Administration, and User’s Guide