Cyclades User's Guide manual Web Manager for Administrators 181

Configuration

2.Modify the number of minutes in the “Idle Timeout” field, and the number of seconds in the “Cycle Time” field, if desired. The default is 3 minutes and 5 seconds respectively.

3.In the “TCP Viewer Ports” field change the TCP port number used by the AlterPath Viewer, if required.

4.Check the appropriate radio button for no encryption (Level 0), keyboard and mouse data encryption (Level 1), or video, keyboard, and mouse data encryption (Level 2).

If you select Level 2 encryption and make a KVM connection, the "No Encryption" option under the “Connection” drop-down menu in the AlterPath Viewer will be greyed-out. In case of Level 1 encryption, the keyboard and mouse are disabled when you select "No Encryption" from the Connection drop-down menu in the AlterPath Viewer.

The encryption level is enabled by the system administrator. The user will not be able to turn off encryption.

Note: 3DES encryption can be selected for a video session. RC4 is the default encryption if 3DES is not selected.

5.To change any of the command key portions of KVM hot key combinations, enter a different letter in the “Quit,” “Power Management,” “Mouse/Keyboard Reset,” “Video Control,” “Switch Next,” “Switch Previous,” or “Port Info” fields.

6.Click “apply changes” to complete the procedure.

Note: Your firewall and proxies may require reconfiguration. Check to make sure that your host can reach the KVM Web Manager and TCP Viewer ports using its assigned IP address.

Web Manager for Administrators 181