Cyclades User's Guide manual IP address assigned to Ethernet interface

e.Enter the IP address to be assigned to the KVM/net unit. KVM/net must be in the same subnet as the TFTP server.

IP address assigned to Ethernet interface [192.168.51.243]

f.Enter the IP address of TFTP server where you downloaded and stored the latest firmware.

Server's IP address [192.168.51.222] :

g.Accept the MAC address value that is assigned to the KVM/net unit’s Ethernet card.

MAC address assigned to Ethernet [00:60:2E:01:61:0C] :

h.Accept the default “Auto Negotiate” value for the Ethernet configuration.

Fast Ethernet ((A)uto Neg, 100 (B)tH, 100 Bt(F), 10 B(t)F, 10 Bt(H)) [A] :

i.The system starts sending a TFTP request to the server to load the specified firmware.

Sending a tftp request.

Trying file : zImage_kvm_200.bin

8.Access to the KVM/net is enabled once the boot is completed.

Note: If you are unable to access the unit or the boot is not successful, then the zImage may be corrupted or damaged. You should download the firmware again from the Cyclades FTP server and restart the TFTP procedure described above.

The unit is now operating from the system RAM. The zImage is required to be saved in the flash memory.

433