Cyclades User's Guide manual To Edit a Rule for IP Filtering

Configuration

Note:User-defined chains cannot be edited.

1.Go to Configuration>Network>Firewall Configuration in Expert Mode.

2.Select one of the default chains from Chain list, and then click the “Edit” button.

If you select a user-defined chain, the following dialog box appears.

If you select one of the default chains, the “Edit Chain” dialog box appears.

3.Select the desired policy from the Policy drop-down list, and then click OK.

4.Click “apply changes.”

5.To edit any rules for this chain, go to “To Edit a Rule.”

TTo Edit a Rule for IP Filtering

1.In Expert mode go to: Configuration>Network>IP Filtering. The IP Filtering configuration form appears.

See “To Add a Rule for IP Filtering” on page 244 procedure section for a definition of the user input fields.

Web Manager for Administrators 241