Cyclades User's Guide Allows you to assign a descriptive alias, such as the name, 335, if needed

	Configure Menu Overview
Table 7-13:KVM Port Configuration Screens (Continued)
Screen	Description
Server name	Allows you to assign a descriptive alias, such as the name of the
	server to which the selected KVM port is connected. Only
	alpha-numeric characters, hyphens (-), and underscores (_) are
	accepted. The new alias replaces the default port name in the
	list of ports as shown here:

Lockout Macro	Allows you to enter the key sequence to lock the server’s
	display. It allows the KVM connected servers to automatically
	switch to locked state when the AlterPath Viewer is closed or an
	idle time-out occurs.
	In addition, when a user tries to access a KVM connected server
	with a full or read-write permission, the lockout macro
	command is sent to the server to lock the current user and
	display the new login window.
	See “Lockout Macro Key Sequences” on page 48.
Power Outlet	Allows you to enter one or more numbers that identify power
	outlet or outlets into which the server that is connected to this
	KVM port is plugged.
	When PMs are daisy-chained, the outlets on the second and
	subsequent PMs are numbered sequentially. For example, if two
	eight-outlet AlterPath PMs are daisy-chained, you would use
	the number 12 to specify the fourth outlet on the second PM in
	the chain. You can enter up to twenty characters, so you can
	specify up to four outlets. See “Controlling Power While
	Connected to KVM Ports” on page 41 for details. Also see “To
	Power On, Power Off, or Reboot the Connected Server” on
	page 335, if needed.

On Screen Display 395