Cyclades User's Guide manual Configuring Basic Networking Using the wiz Command

Performing Basic Network Configuration

‰DNS server’s IP address:

‰Gateway IP address:

‰Network mask:

‰KVM/net’s MAC address (from the label on the bottom):

‰NTP server’s IP address (if you are using a time/date server):

Note: The following procedures tell you to disable DHCP. Enabling DHCP requires a DHCP server at your site. See “Considerations When Choosing Whether to Enable DHCP” on page 57 for more details and see “To Use a Dynamic IP Address to Access the Web Manager” on page 102 for the tasks that must be performed.

Configuring Basic Networking Using the wiz Command

The following procedures require a hardware connection already made between the KVM/net’s console port and the COM or USB port of a computer, as described under “To Connect to the Console Port” on page 82.

TTo Log in to the KVM/net Through the Console

From your terminal emulation application, log in to the console port as root.

KVM/net login: root

Password: cyclades

As shown in the previous screen, the default password is “cyclades.” If the password has been changed from the default, use the new password.

TTo Change the Password Through the Console

If the default password “cyclades” is still in use, change the root password.

Installation 85