Cyclades User's Guide specification

Configuration

Any authentication method chosen for the KVM/net is used for authentication of any users attempting access through telnet, ssh, or the Web Manager.

See “Authentication” on page 45 for more details.

•To configure all authentication servers for the KVM/net ports.

The administrator fills out one of the tabbed forms to set up an authentication server for each authentication method to be used by the KVM/net and by any of its ports: RADIUS, TACACS+, LDAP, Kerberos, SMB (ports only), NIS. See “Configuring Authentication Servers for Logins to the KVM/net and Connected Devices” on page 208.

See “To Configure an Authentication Method for KVM/net Logins” on page 206 for instruction on how to specify an authentication method for ports.

TTo Configure an Authentication Method for KVM/net Logins

See “Network” on page 226, if needed, for background information.

1.Go to Configuration>KVM>Authentication in Expert mode. The AuthType form displays, as shown in the following figure.

Figure 4-23:KVM Unit Authentication Configuration Form

2.To specify an authentication method for logins to the KVM/net, select a method from the Authentication drop-down list.

206	AlterPath KVM/net Installation, Administration, and User’s Guide

Image 222

Cyclades User's Guide manual To Configure an Authentication Method for KVM/net Logins

Contents

Software Version Page Contents Configuring Logging, Alarms, and Snmp Traps Redefining Sun Keyboard Equivalent Hot Keys Installation 119 116117 120 170 Configuration 167 Software Upgrade 169Host Settings 228 171 279 277278 281 321 Network Configuration Screens OSD 366319 325 394 389390 396 Glossary Xii Before You Begin Audience Document Organization This document contains the following chapters Related Documents Typographic and Other ConventionsTypeface Meaning Example Term or Convention Meaning Examples Introduction Chapter Description KVM Terminator Usage and Types Introduction Types of Ports Guidelines for Using the KVM/netConnectors on the KVM/net Port Types Connection Information COM port on a computer 1Port Types Connection Information Where DocumentedConsole Local area network LAN Connectors on the Back 2KVM/net Back Panel Power Connector and Power Switch KVM Ports Management Ports Console, Ethernet, User 1, User 5Management Ports Introduction Activity LEDs on the Back of the KVM/net AUX PortsEthernet Console 7LEDs on the KVM/net Management Ports Number Label Function Color/Status VID AlterPath KVM/net Ordering Options Model Number Part Numbers KVM Ports Username Responsibilities Default Password Types of Users Simultaneous KVM/net Logins 8Simultaneous Administrator Login Prompt Simultaneous Server Connections Administration Options Local Users KVM-over-IP Inband TotalCyclades Web Manager Cyclades Web Manager Prerequisites for Using the Web Manager TCP Ports Task Cascaded Devices 9Cascaded KVM Devices from a KVM/net AlterPath KVM Unit Management Ports Connectors KVM ExpanderAlterPath KVM KVM/net Access Auth Type Accessing Ports on Cascaded KVM DevicesDefault Access Types KVM/net Port Permissions Understanding KVM Port Permissions KVM Port Permissions Hierarchy Tools Where DocumentedWeb Manager To Assign KVM Port Access to a User or Group on Decision 1 Check User’s KVM Port Permissions Decision 2 Check Group’s KVM Port Permissions Decision 3 Check Generic User’s KVM Port Permissions Decision 4 Check User’s Default Permissions Decision 5 Check Group’s Default Permissions Server Access Inband and Out of Band Decision 6 Check Generic User’s Default PermissionsIn-band Out-of-Band Connection Type Source PowerIn-band Out-of-Band Supported Computers Server Connection Description Labels Server Connection Description Labels In-band KVM + In-band Administering Users of Connected Servers Types of Access to PortsTasks Related to Access to Connected Devices Task Redefining Keyboard Shortcuts Hot Keys Redefining KVM Connection Hot KeysRedefining Sun Keyboard Equivalent Hot Keys Part Web Where OSD Form Manager Documented Disabling Mouse AccelerationSummary of Tasks for Redefining Hot Keys Screen Resolution and Refresh Rate Resolution Refresh Rates Hz Packet Filtering on the KVM/net 15Levels of IP Filtering Rule Power Management Options for Managing Power Controlling Power While Connected to KVM Ports Setting Up and Configuring Power Management Task Where Documented/Notes 17Tasks KVM-connected Power Management Security Security Profiles Authentication Choosing Among Authentication MethodsEncryption Authentication All Type Description KVM/net KVM Ports Ldap Tools for Specifying Authentication Methods Uses Terminal Access Controller Access Control SystemAuthentication TACACS+/Local Uses local Authentication if Lockout Macro Operating System Lockout Macro Select Lock Screen and enter the desired Go to Launch Preferences DesktopPreference Keyboard Shortcuts Hot key sequence, for example, Ctrl+Alt + Regional & Accessibility Keyboard Default key sequence is Ctrl+Alt +LDefault key sequence Scroll down to Desktop to see the default Notifications, Alarms, and Data Buffering Shortcut Key Prerequisites for Logging to Syslog Servers Example of Using Facility NumbersSyslog Servers Facility Numbers for Syslog Messages Configuring Logging, Alarms, and Snmp Traps Snmp Traps VPN and the KVM/net Considerations When Choosing Whether to Enable Dhcp Server Type Connection KVM Terminator Model Part Number KVM Terminator Usage and TypesActivity LEDs on the Terminator VGA and PS/2 ports APK4615 PC / Sun VGA and USB ports KVM Expander Features KVM Expander KVM Expander Models and Components ATP4208 ATP4216 11KVM Expander Back Panel Components KVM/net They allow the connection of a CAT 5 cable to a Ports on the KVM ExpanderPort Type Use and Connection Information Terminator, which is connected to a server Power Outlets on the KVM Expander LEDs on the KVM Expander Cascading a KVM Expander 14Connecting a KVM Expander to the KVM/net KVM Unit Model Number KVM Expander Maximum Servers AlterPath KVM KVM Expander 512 Upgrading the Microcontroller Code 15Devices Form on KVM/net Web Manager User Access AlterPath KVM RP Connectors on the Back of the KVM RP 17 KVM RP Front Port Type Use and Connection Information Installation Page Shipping Box Contents KVM/net Description Purpose Setting Up the KVM/net To Mount the KVM/net Use a Phillips screwdriver to tighten the screws Making an Ethernet Connection To Make an Ethernet Connection Connecting Servers to the KVM Ports 2Connecting Servers to KVM Ports To Prepare to Connect Servers to the KVM/net To Connect Computers to KVM Ports Installation Making a Direct Connection for Network Configuration To Connect to the Console Port Powering On the KVM/net and Connected Devices To Connect to the User 1 Management Port Performing Basic Network Configuration To Power On the KVM/netTo Power On Connected Devices Configuring Basic Networking Using the wiz Command To Change the Password Through the ConsoleTo Log in to the KVM/net Through the Console To Use the wiz Command to Configure Network Parameters Enter the IP address for the gateway Enter the netmask for the subnetwork Enter y to save the changes Configuring Basic Networking Using the OSD Action OSD Equivalent To Log into the OSD To Change a Password Using the OSD To Configure Network Parameters Using the OSD Installation Performing Basic Network Configuration Installation To Set the Time and Date Using the OSD Installation Completing Configuration Using the Web Manager Changing the Root Password Command Line Changing Default PasswordsChanging admin’s Default Password Web Manager Password cyclades Enter the passwd command Changing Default Passwords OSD Save the new password by entering the saveconf commandLog out To Use the Default IP Address to Access the Web Manager To Use a Dynamic IP Address to Access the Web Manager Inet addr192.168.50.72 Bcast192.168.51.255 Mask255.255.252.0 Preconfiguring the KVM/net for Remote Installation To Preconfigure the KVM/net Task Where Documented Additional Configuration TasksTo Set Up a Preconfigured KVM/net See the following sections for other procedures To Disable Mouse Acceleration Windows XP/Windows To Disable Mouse Acceleration Windows To Disable Mouse Acceleration Windows ME To Disable Mouse Acceleration Windows 95/ 98/NT To Disable Mouse Acceleration Linux Exit the AlterPath Viewer Required Security Settings For Internet Explorer Modify IE Security SettingsTo Modify Trusted Sites Settings Click the Sites button to open the Trusted sites dialog box To Modify Internet or Local Intranet Zone Settings Download signed ActiveX controls Installation 113 114 Advanced Installation Procedures Connecting an External Modem To Connect an External Modem to the AUX Port Connecting AlterPath PMs to the KVM/net To Connect an AlterPath PM to the AUX Port To Connect Multiple PMs to the KVM/net Installing the AlterPath KVM Expander Shipping Box Contents KVM Expander Setting Up the KVM Expander To Mount the KVM Expander Advanced Installation Procedures 123 Powering On the KVM Expander and Connected Devices To Power On the KVM Expander To Power On KVM-connected Devices Connecting Cascaded KVM Units to the Primary KVM/net To Connect a Secondary KVM Unit to the Primary KVM/net To Connect a KVM Expander to the Primary KVM/net Installing the AlterPath KVM RP Tasks Shipping Box Contents AlterPath KVM RP Options for Accessing the KVM RP To Connect the KVM RP to the KVM/net Supplying Power to the KVM RP To Power On the KVM RPTo Connect the KVM RP to the Local Work Station Web Manager for Administrators Administrative Modes Wizard Mode Expert Mode Common Tasks Web Manager for Administrators 135 Common Features of Administrators’ Windows Button Name Use Obtaining More Information Logging In to the Web Manager and Saving ChangesWindow Area Purpose To Log In to the Web Manager as Admin IPaddress/login.asp?portname=portnumber To Save Configuration Changes Administrative Modes Wizard Mode Procedures in Wizard Mode 2Example Window in Wizard Mode Steps in Wizard Mode Wizard Security Profile WizardPre-defined Security Profiles Custom Security Profile Security Profile SSH Access Web Access Protocols SecuredDefault Moderate To Select or Configure a Security Profile Wizard Security Profile SSH Access Web Access Protocols CustomSSH Options SSH Http Options 3Security Advisory Dialog Box 4Security Profile in Wizard Mode 5Custom Security Profile Dialog Box Network Settings Wizard 3Configuring KVM/net in Expert Mode To Change Network Settings Wizard Access Wizard 6Network Settings in Wizard Mode 7User Access in Wizard Mode To Add a User Wizard Field Name Definition To Change a Password Wizard Wizard mode, go to Access. The Access form appearsTo Delete a User Wizard 156 8System Log in Wizard Mode System Log Wizard To Add a Syslog Server Wizard Expert Mode To Delete a Syslog Server Wizard Access 10Access Form in Expert Mode Ipdu Power Management Connect to Server Outlets Manager To View Status, Lock, Unlock, Rename, or Cycle Power Outlets View IPDUs Info To View and Reset Ipdu Information Users Manager To Configure Users to Manage Specific Power Outlets Configuration To Configure Creation of Alarms and Syslog Files for IPDUs To Specify or Change the Alias of an Ipdu Configuration Software UpgradeTo Upgrade Firmware on an AlterPath PM KVM Web Manager Form Where Documented General Parameter Name Definition Enabling Direct Access to KVM Ports To Enable Direct Access to KVM PortsRedefining KVM Connection Keyboard Shortcuts Hot Keys Defaults Common Command Key Where Defined Escape Sequence FormatConfigurationKVMGeneral To Redefine KVM Session Keyboard Shortcuts Specifying Authentication for KVM Port Logins Redefining Sun Keyboard Modifier KeysTo Redefine the Sun Keyboard Modifier Keys Local Users and IP Users 18KVM Configuration User 1/User 2/IP Users Form Value is 60 minutes. a value of 0 disables the idle timeout Sets the maximum time in minutes for the session to be idle To Configure Local User 1 and User 2 Sessions IP Users only. The default is 5900+. You may need to changeMore details, see TCP Ports on page 20. Port numbers To Configure IP User KVM Over IP Sessions Expert Web Manager for Administrators 181 19KVM Device Configuration Form Devices Configuring Individual KVM Ports To Configure a KVM Port for Power Management 184 Web Manager for Administrators 185 To Enable or Disable a KVM Port To Specify or Change the Alias for a KVM Port Configuring Cascaded KVM Units 188 To Edit the Configuration of a Cascaded KVM Unit 190 To Delete the Configuration of a Cascaded KVM Unit Users & Groups 20KVM Users & Groups Configuration Form To Add a User Expert Password associated with the user name Name of the user to be addedFor more details To Add a Group To Change a User’s Password ExpertTo Delete a User or Group Expert Click OK Click apply changes To Select Users and Groups for Assigning KVM Port Access To Modify a Group To Assign KVM Port Access to a User or Group Web Manager for Administrators 197 198 Configuring Inband RDP Servers 21Inband Configuration Form Prerequisites for Inband Access to RDP Servers To Add or Modify an inband RDP Server 202 Web Manager for Administrators 203 To Delete an inband RDP Server Security Configuring an Authentication Method To Configure an Authentication Method for KVM/net Logins 23KVM Unit Authentication Configuration Form To Configure an Authentication Method for KVM Port Logins NIS, Local/NIS, NIS/Local, or NIS Method Variations ProceduresTo Configure an NIS Authentication Server on DownLocal Group Authorization To Identify a Kerberos Authentication Server 210 24Kerberos Server Authentication Form To Identify an Ldap Authentication Server 25LDAP Server Authentication Form To Configure Group Authorization on a Ldap Server To Configure an Smbntlm Authentication ServerTo Configure Group Authorization on a Ntlm Server Configuring Active Directory Schema To Configure an NIS Authentication Server To Identify a Radius Authentication Server 27NIS Server Authentication Form To Configure Group Authorization on a Radius Server 28Radius Server Authentication Form To Identify a TACACS+ Authentication Server 29Tacacs+ Server Authentication Form Group Authorization on TACACS+ To Configure Group Authorization on a TACACS+ Server 222 To Select or Configure a Security Profile Expert 30Security Profiles Configuration Form Expert 31Custom Security Profile Dialog Box 8Configuring KVM/net in Expert Mode Security Network configuration comprises eight forms Form Use this form to Where DocumentedNetwork VPN Host Settings To Configure Host Settings Expert DNS Service Ethernet Port Gateway numeric identification Name that identifies the domain forExample, domainname.com Number 33Syslog Configuration Form Syslog 232 IP Filtering Add Rule and Edit Rule Options Inverted Check Boxes Source or Destination IP and Mask Field/Menu Option Definition Source Port Destination PortTCP Flags Source Port or Destination Port field Field Definition Source PortSpecify a source or destination port number for filtering Source Port field. If you specify a second number in the to Field Definition Input Interface Output InterfaceFragments Field or Menu Name Definition To Add a Chain To Edit a Chain To Edit a Rule for IP Filtering To Add a Packet Filtering Rule To Add a Chain for IP Filtering To Edit a Chain for IP Filtering To Add a Rule for IP Filtering Web Manager for Administrators 245 Indicates the action to be performed to IP packet when it matches the rule. ForSource network mask. Required when a Example, the kernel can Accept Drop Destination IP to invert the target action Destination network maskSelect the check box adjacent to For example, the action assigned to Invert the target action. For example, On the type of error message such as, alertSelect box adjacent to Output Interface to Action assigned to the target will be Check box to include TCP options in the log Prefix that will identify the logCheck box to include TCP sequence Check box to include IP options in the log To Configure VPN VPN Web Manager for Administrators 251 Edit or complete the appropriate fields as follows Any descriptive name you want to use toIdentify this connection such as Boot action configured for the host, either Field NameIgnore, Add, Start To Configure Snmp Enter the following system information, as necessary Community name acts as a password toAuthenticate messages sent between an Snmp client and a router containing an Example, mydomain Authenticate messages sent between an SnmpPhysical location of the system for Client and a router containing an Snmp server Object Identifier Notifications To Configure Snmp Traps 260 Field Name Description Define the event you want to trigger aNotification for To Configure Hosts Host Tables 36Host Tables Configuration Form Static Routes To Add, Edit, or Delete a Static Route 12Add/Modify Static Routes Fields AUX Port Number of hops 13PPP Fields for Configuring the AUX Port System Time/Date To Set the KVM/net’s Date and Time Manually To Set The Time and Date With NTP Setting up Customized Timezone Configuration Using the Custom Option to Set Daylight Savings Time Creating a Custom Timezone Selection Boot Configuration 42System Boot Configuration Form Field or Value Name Description New IP address for the KVM/net Speed of the Ethernet connection. Select Appropriate Ethernet setting if you need toChange the Auto Negotiation default value 100BaseT Half-Duplex To Configure KVM/net Boot To Configure the Online Help Path Online Help Viewing System Information General To View General Information for Your KVM/net Station Status To View Station Status FieldInformation Management Field Information Configuration data Menu Selection Use this menu toUse a FTP server to save or retrieve your Reboot the system Backup ConfigurationReset or kill sessions View the status of all active sessions as well as Such as KVM8802config040406 in a directory called upload Field DefinitionIP address of the FTP server To Back Up or Retrieve KVM/net Configuration Data 286 Firmware Upgrade 48Firmware Upgrade FTP Site PasswordField/Menu Definition Name Type Username ZImagekvm200.bin ZImagekvm200.bin.md5 To Upgrade Firmware Microcode Upgrade Target Name Used on Form Filename Format Component IP modulesModules Field Name Definition Target FTP ServerDirectory To Download Microcode From an FTP Server Microcode Reset To Reset the Microcode After Upgrade Web Manager for Administrators 295 Column Definition Active SessionsTo View Active Sessions Information Name of the KVM port To Kill an Active Session Reboot To Reboot the KVM/net From a Remote Location Web Manager for Regular Users Web Manager for Regular Users 1Example of Regular User Web Manager Form Prerequisites for Logging in to the Web Manager To Log Into the KVM/net Web Manager as a Regular User Web Manager for Regular Users 303 Ipdu Power Management Connect to Server See Controlling Power of a KVM-connected Server on Changing Your KVM/net Password To Change Your KVM/net Password Accessing Connected Devices 308 Who Can Access Connected Devices Server Connections What You See Viewing KVM Connections 1AlterPath Viewer for KVM Connections 312 Viewing In-band Connections 2ActiveX Viewer for In-band Connections Prerequisites for Accessing Servers With KVM Connections 1Supported Screen Resolutions and Refresh Rates Web Manager Login Screen Conditions Accessing Connected Devices 317 Login Screen Direct Logins Not Enabled Connect to Server Drop-down List Accessing Connected Devices 319 Login Screen Direct Logins Enabled, Only IP Address Entered Connecting to Servers Remotely Through the Web Manager 322 Accessing Connected Devices 323 IPaddress/login.asp?portname=portnumber Connecting to Servers Locally Through the OSD To Connect to Servers Through the OSD Connection Menu Accessing Connected Devices 327 Controlling KVM Port Connections Hot Keys for KVM Connections Key Combination Action Hot Keys for Emulating Sun Keyboard Keys Win Function Key Sun KeyNumeric Keypad To Return to the Connection Menu After Connecting to a Port To View Connected Port Information Cycling Between Servers To Initiate Cycle by Server To Adjust Screen Brightness and Cable Length Default is Ctrl+k q Resetting the Keyboard and Mouse To Reset the Keyboard and Mouse Controlling Power of a KVM-connected Server To Power On, Power Off, or Reboot the Connected Server Closing a KVM Connection To Close a KVM ConnectionSharing KVM Port Connections Quit this session Connect read only Connect read write Kill other session AlterPath Viewer Settings Recommended SettingsMenu Select the following options Options Menu Menu Selection Description Vertical Offset Setting the Viewer OptionsField or Menu Item Function Horizontal Offset Quality ----Speed Connection Menu High Color Menu Selection Function Encryption TypeNo Encryption Low Color 344 Accessing Connected Devices 345 7Tasks for Configuring and Making Dial Up Connections User Modem Connections To Configure a PPP Connection on a Remote Computer To Make a PPP Connection From a Remote Computer Accessing Connected Devices 349 350 On Screen Display Navigating the OSD Basic Navigation KeysKey Action Tab to the OK button and press the Enter key Logging In Through the OSDCommon Navigation Actions On your keyboard OSD Main Menu To Log into the KVM/net Through the OSD Menu Selection Select the menu item to Where Documented Invoking OSD Using PrintScreen KeyTo Invoke OSD Using Print Screen Button Reboot the KVM/net Connection Menu Power Management Menu Configure Menu Overview Network Date/TimeUser Station Groups Notifications Authentication Save/Load Config ExitUsers Cascade Understanding OSD Configuration Screen Series 2OSD Configuration Series Screens General Configuration Screens OSD Screen Description Escape sequence or keyboard shortcuts configuration Syslog facility number that is used by the administratorExamples of using facility numbers as needed. In addition, Default Ctrl+k, shown as Ctrlk in the screen. See Administrator Enables or disables direct access to KVM ports from the WebManager login screen AlterPath Viewer. For example 5903+ means that the first Network Configuration Menu Options OSD Network Configuration Screens OSD Save overwrites the backup configuration files and makes Enable or disable DHCP. When you select enabled, the screenActive saves the changes to the configuration files. active Network Configuration menu IP address for the DNS server Domain nameHostname for the KVM/net Snmp Configuration Screens OSD On Screen Display 369 370 Commonly known. By default, the public community cannot Email address for the KVM/net administrator, for exampleFurther defined by the type of access specified under Access Snmp information on the KVM/net Read/Write Read-write access to the entire MIB except for Read Only Read-only access to the entire MIB ManagementInformation Base except for Snmp configuration objects Snmp configuration objects VPN Configuration Screens OSD On Screen Display 373 Any descriptive name you want to use to identify this Connection such as MYCOMPANYDOMAIN-VPN This is the hostname that a local system use for IPSec Negotiation and authenticationHostname of the KVM/net, referred to as the local host It can be a Fully Qualified Domain Name preceded by @. For Side sends packets to the KVM/net VPN connection is ignored. Add means to wait forConnections at startup. Start means to make the connection IP Filtering Configuration Screens On Screen Display 377 378 Only appears when Add Chain is selected. Entering the name Lists the default chains along with any administrativelyConfigured chains, the Add Chain, and the Exit options Appears when a user-added chain is selected from the Filter Chosen from the Chain Chainname menu. Choices are Target action to take when a packet’s characteristics matchNetmask of the subnetwork where an input packet originates Accept or Drop Netmask of the subnet to which an output packet is going Choices are All, Numeric, TCP, UDP, IcmpAppears only if Numeric is selected from the Protocol menu Appears only if TCP is selected from the Protocol menu Options are Any, Set, Unset Appears only if All, Numeric, TCP, UDP, or Icmp Are selected from the Protocol menu Hosts Configuration Screens OSD ScreenDescription Static Routes Configuration Screens Appears only when the Edit and Delete options are selected Choices are default and any previously configured staticRoutes Listed in the routing table Types of routes host, net, or default. Note a defaultAppears only when net is selected from the Host or Net IP address for the target host or network Date/time Configuration Screens ScreenNumber of hops to the destination User Station Screens OSD. The default is 3 minutes Period of inactivity before the user is logged out from Redefine the command key for the KVM connection quit hot Default is 10 minutesUS Default Period of inactivity before the screen saver starts. 12User Station Configuration Screens Mouse/keyboard reset hot key Following table shows the KVM port configuration screens KVM Ports ScreensDefined aliases Display the new login window Accepted. The new alias replaces the default port nameCommand is sent to the server to lock the current user Allows you to enter one or more numbers that identify power 5AUX Port Configuration Screens AUX Port Screens Aux port are enabled by default. If you need to disable a Following table shows the AUX port configuration screensChoices are Disable, Power Management, and PPP Select the desired protocol Power Management or PPP None, even, or odd Local IP address Cascade Devices Options include Add device, Edit device, and Delete device Device name Screen Description Cascade Device Edit Device Device Appears when Delete device is selected from the CascadeDevice Choose an option screen Following confirmation screen appears once a cascaded Users and Groups Screens On Screen Display 403 7Users and Groups Configuration Screens Selected. Note Passwords are case sensitive Options are Add User, Change Password, Delete UserAppears only when Add User or Change Password are When the password is successfully confirmed, the following Options are Add group, Add user to group, Del. user from Appears only when Change Password or Delete User areConfirmation screen like the following appears Group, Delete group, and Exit Multiple users, use a comma to separate each username When Add user or Add user to group are selected. To addWhen the user is successfully added, the following Confirmation screen appears Generic Users’ default permission is No Access, and no Generic Users, admin, and any administratively definedAdmin and any users in the admin group. By default, Regular users that may be added cannot access any KVM ports Ports, which apply unless the user has specific access Access list includes the Reset all, Default, MultipleDefault option defines access permissions for all KVM For a new user, because Default Access, is not defined, Syslog Screens Alarm Trigger Notification ScreensDefine the event you want to trigger a notification for Trap Number CommunityServer IP Authentication Screens Screen Body Description 9Authentication Options and Screens Authentication method options for KVM/net logins. Default = Method for KVM/net logins, or choose oneAuthentication server Kerberos, Ldap, Radius, TacacsPlus Local. Other authorization type options are Kerberos IP address of the Kerberos or Ldap server Login attribute Choices are Yes or No Radius or TACACS+ authentication server IP addresses of one or two optional accounting servers 23Smb Ntlm Configuration Screens IP addresses for one or two SMB Ntlm Authentication servers. The second server IP isChoose the NIS authentication server Optional Save/Load Configuration Screens On Screen Display 421 When Save Configuration is selected, the following two FTP Login Username and Password. The last screens 25Save/Load Configuration ScreensWhen Save to FTP is selected, the following five screens Confirm the save to FTP succeeded System Info Menu Information Type Example RP main RP local To reboot the KVM/net RebootTo Access System Information Select Reboot from the Main Menu Following message appears Select Yes to reboot the KVM/net To Use to the KVM RP to Access the KVM/net Controlling the OSD Through the AlterPath KVM RP On Screen Display 429 430 How to Replace the KVM/net’s Boot Image To Boot From TftpAppendix a Press ESC when the Testing Ethernet prompt appears Select the boot type at the following prompt IP address assigned to Ethernet interface 434 Table A-1Boot Message Exit ftp when the download is completed Reboot the KVM/net To Save the zImage into the KVM/net’s Flash MemoryFrom this directory, ftp to your FTP server How to Upgrade the Firmware on KVM/net FTP MethodSSH/SCP Method Following md5 file is generated and displayed 439 How to Boot the KVM/net Over the Network Firmware boot from Flash or Network F N How to Boot the KVM/net in Single User Mode To Boot the KVM/net in Single User ModeType spsingle spacebar, then the word single If the password is forgotten execute the following command System reboots and displays the following message Root@none root# saveconf Root@none root# reboot How to Disable Mouse Acceleration Using Windows Registry 446 Technical Specifications Appendix B Dimensions WxDxH Certifications General Safety Precautions Appendix C 450 Rack or Cabinet Placement Table PlacementSafety Guidelines for Rack-Mounting the KVM/ net Temperatur Safety Precautions for Operating the AlterPath KVM/net Circuit Overloading Sicherheitsvorkehrungen beim Betrieb des AlterPath KVM/net 455 456 Basic In/Out System Baud Rate BogoMips BootBootp Bonding Linux DNS Server Cidr NotationCluster Domain Name Flash Escape SequenceEthernet Flow control Hot-Swap IP addressIP packet filtering IPsec Kerberos Network Mask Packet Parity Port Root Access Routing TableSecure Shell SSH Server Farm Snmp Traps Stop Bit Subnet MaskSudo Telnet Rack Height Unit Watchdog timer Index 268 Adding 240, 243 editing 240 Authentication servers 208 AUX 1 port Basic networking OSD CPU 424 Domain Name 416, 419, 420 download microcode 293 downloading 477 478 209 LAN Ldap Ldap authentication server, configuring an LEDs IP address and port entered 320 IP address entered Netmask 367, 388 network 226 Network bits/sec 410 484 485 Conventions for showing how to navigate to screens 200 Target 380 489 VPN 56