Cyclades User's Guide Upgrading the Microcontroller Code, 15Devices Form on KVM/net Web Manager

KVM Expander

Adding the KVM Expander to the KVM/net Unit’s List of Cascaded Devices

Once the administrator connects the KVM Expander to the primary KVM unit, the administrator must add the Expander to the primary unit’s list of cascaded devices. Using the KVM/net Web Manager in Expert Mode, go to: Configuration>KVM>Devices to see the form displayed in the following figure.

Figure 1-15:Devices Form on KVM/net Web Manager

See “Configuring Cascaded KVM Units” on page 187 for instructions on adding, deleting, and modifying cascaded devices.

Upgrading the Microcontroller Code

Once a KVM switch is installed and configured, administrators can use the Microcode Upgrade form on the primary KVM unit to upgrade the microcode on a KVM terminator, switch, RP, Port Expander, or video compression modules. Using the KVM/net Web Manager in Expert Mode, go to: Management > Microcode Upgrade to see the form displayed in the following figure.

Introduction 67