18.9.6 Speaker Volume
While talking handsfree via the phone's speaker, you can adjust the volume of the incoming call.
1.With the call connected on the speaker, press the 
key.
2.Use the + plus and – minus keys to adjust the volume.
3.The display will return to normal after a few seconds.
18.9.7 Automatic Gain Control
When using automatic gain control (AGC), the phone tries to maintain a constant audio level even if the incoming call changes between loud and quiet.
1.Press the 
MENU button.
2.Use the 
up and down 
arrow keys to locate the option Advanced.
3.Press the Select soft key.
4.Use the 
up and down 
arrow keys to locate the option Audio.
5.Press the Select soft key.
∙Use the 
up and down 
arrow keys to switch between the Handset, Headset or Speaker settings for automatic gain control.
∙To change a setting, use the 
left and right 
arrow keys or press the On/Off soft key.
6.When completed, press the Done soft key.
7.Press the Exit soft key to exit the menus.
18.9.8 Default Handsfree Audio Path
By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so the audio is played through the headset by default rather than the speaker.
1.Press the 
MENU button.
2.Use the 
up and down 
arrow keys to locate the option Call Settings....
3.Press the Select soft key.
4.Use the 
up and down 
arrow keys to locate the option Audio Path.
5.Use the 
left and right 
arrow keys or press the Change soft key to change the setting.
6.When completed, press the Done soft key.
7.Press the Exit soft key to exit the menus.
1400 Series Phone User Guide | Page 142 |
IP Office |
