Avaya 15-601040 manual Erase Options, ∙ Contacts, ∙ Call Log, ∙ Options, ∙ Language

Phone Settings: Redial Mode

18.4 En-Bloc Dialing

By default, when you start dialing a number on your phone, the phone immediately connects to the telephone system and starts passing the digits you dial to the phone system. You cannot correct the digits you have already dialed except by ending the call and starting again. Also if you pause dialing for too long the phone system may think that you have finished dialing and will attempt to connect the call using only the digits you have completed dialing so far.

En-bloc dialing allows you to compose and edit the number to dial on your phone's display before it is sent to the phone system to be dialed.

Through the phone's menus you can select whether you want to use traditional or en-bloc dialing when making calls. Your chosen setting is then applied whenever you are using a phone that supports en-bloc dialing.

You can enable or disable your en-bloc dialing setting through the phone's Features menu.

1.Press the Features soft key if shown.

∙To access the menu during a call, press the right arrow key or press the PHONE key and then press the Features soft key.

2.Use the up and down arrow keys to scroll the display to the option Call Settings.

3.Press the Select soft key or the OK button or the right arrow key.

4.Use the up and down arrow keys to scroll the display to the option En-Bloc Dial.

5.Use the left and right arrow keys to change the setting or use the indicated soft key.

18.5 Erase Options

1400 Series only

The A-menu accessed by pressing the key can be used to set a number of phone options specific to the phone. You can use the Erase menu to reset those options back to their defaults.

1.Press the MENU button.

2.Use the up and down arrow keys to locate the option Advanced.... Press the Select soft key.

3.Use the up and down arrow keys to locate the option Erase. Press the Select soft key.

4.Use the up and down arrow keys to select which settings you want to erase.

∙Contacts

This options is not used as the contacts are stored by the telephone system.

∙Call Log

This option is not used as your call log is stored by the telephone system.

∙Options

This option is used to reset other settings set through the phone's A-menu.

∙Language

This option is not used as your language selection is stored by the telephone system.

∙All

Will only be applied to your A-menu options.

5.Press the Erase soft key.

6.When completed, press the Done soft key.

7.Press the Exit soft key to exit the menus.

1400 Series Phone User Guide	Page 129
IP Office	15-601040 Issue 06d (Monday, March 19, 2012)