EN 43
1
2
1 | 2 | 3 |
|
4 | 5 | 6 | 3 |
7 | 8 | 9 | 4 |
|
|
| 4 |
0
1 | 3 |
| |
2 |
|
ATTENTION
If the programme you have just made and “DV” are blinking, there is a conflicting programme on the DV deck.
A Press rtto move the highlight bar to “DV”, then press OK or e.
DV Programme Check screen appears.
B Cancel or change programme setting as described in step 2 and 3 in the right column.
When programmes overlap each other
If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.
Example: Programme 1 (you have just made) and Programme 4 overlap each other on the VHS deck.
A Confirm the overlapping programmes.
Overlapping programmes blink on the TV screen.
B Select the programme to modify.
Press rt, then press OK or e.
●You can only select one of the overlapping programmes.
NOTE:
If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the recorder will return to the normal screen.
C Cancel or change programme setting.
To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.
To change a programme, press the appropriate button:
NOTE:
If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.
