60 EN | REMOTE CONTROL |
Remote Control Functions
Remote A/B/C/D Code Switching
The remote control is capable of controlling four JVC video recorders independently. Each of recorders can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B, C or D code signals.
On the remote control
A Display the code.
Press and hold VHS or DV on the remote control for over 2 seconds. The code currently set blinks on the LCD panel.
B Change the remote control code.
Press the number key “1” for A, “2” for B, “3” for C or “4” for D.
C Set the remote control code.
Press OK to set the code.
LCD panel
1
2 |
|
|
1 | 2 | 3 |
4 | 5 | 6 | 3 |
7 | 8 | 9 | 4 |
|
|
| 4 |
0
1 | 3 |
| |
2 |
|
1 | 3 | 2 |
On the recorder
D Display the code.
Press 4 on the recorder for over 5 seconds while the recorder is turned off. The code currently set appears on the front display panel.
●If the code displayed on the front display panel is different from the code set on the remote control, go to step 5.
E Change the recorder’s code.
Press 8 on the remote control. The code currently set on the remote control will be applied to the recorder.
NOTE:
When “POWER SAVE” is set to “ON” ( pg. 69), it is impossible to change the remote code.
