Konftel 100 Calling, If the R key does not work, Programming the R key , If your three-party call is not answered

Calling
Konftel 100 • User Guide
7
The requirements for the operation of the R key vary between PBXs and from
country to country. Konftel 100 therefore lets you program the R-pulse time so
that it works with most PBXs on the market.
Hold down the R key for three seconds until the green
LEDs flash and you hear three short beeps.
Enter the value for the R-pulse. The default setting is 2.
Check in the table below whether the setting is right for
your PBX/country.
Value: Time: PBX/country:
1–R function 65 ms Ericsson MD110
2–R function 100 ms Scandinavia, Europe
3–R function 150 ms Reserved
4–R function 270 ms Germany, France, Israel
5–R function 600 ms USA
Press the OK key to save the setting and exit.
1-5...
If the R key does not work
If your three-party call is not answered
Press the R key followed by the 1 key to re-
turn to the first call.
Note: The availability and function of the three-party feature can vary from
country to country but also depend on the PBX to which the Konftel 100 is
connected. If you want to connect multiple participants we recommend you use
a telephone meeting service. If you have questions regarding availability, please
contact your dealer.
Programming the R key (default setting = 2)
English