IBM Tivoli and Cisco manual Warnhotfixes, Failhotfixes, Hotfixwf

Back at the list of the collectors right-click the Windows Hotfixes collector. Then click Edit collector parameters. The parameters for collector nac.win.any.hotfix.PostureHotfixV2 are displayed as shown in Figure 6-43.

Figure 6-43 Parameters for Windows Hotfixes collector

This collector checks for the missing critical hofixes. The parameters are described in Table 6-4.

Table 6-4 Parameter information for nac.win.any.hotfix.PostureHotfixV2

Parameter name	Parameter type	Description
WARN_HOTFIXES	Operational	Parameter used to specify which Microsoft
		hotfixes are suggested. If a Microsoft hotfix
		in this list is missing, a WARN element will
		be generated.
FAIL_HOTFIXES	Operational	Parameter used to specify which Microsoft
		hotfixes are required. If a Microsoft hotfix in
		this list is missing, a FAIL element will be
		generated.
HOTFIX_WF	Workflow	Name of the workflow used for remediation
		if a suggested or required Microsoft hotfix
		is not installed.

The operational parameters listed above accept multiple values, so edit the appropriate parameters by selecting the proper tabs and adding all of the hotfixes that you require to be installed in your environment. To add additional values to the parameter click the plus sign. To remove the value click the minus sign.

Do not change the name of the workflow. When you are done editing click Save.

170Building a Network Access Control Solution with IBM Tivoli and Cisco Systems