IBM Tivoli and Cisco manual Noreboot, 433

3.Create the configuration file for the sputil.sh utility containing the instructions on how to build the package. Copy the Sample.properties file from the sample_TCRZLSoftwareInstalled directory to the TCRZLSoftwareInstalled directory and edit it with the text editor to match the content specified in Example 8-14.

Example 8-14 Sample.properties file for TCRZLSoftwareInstalled workflow

WorkflowName=TCRZLSoftwareInstalled

SourceFilename.arrayLength=1

ExeArg.arrayLength=1

SourceFilename[0]=zapSetup_65_737_000_en.exe ExeArg[0].arrayLength=3

ExeArg[0][0]=/s

ExeArg[0][1]=/i

ExeArg[0][2]=/noreboot

TmfWebUIEndpoint=tcmweb

4.Run the sputil.sh command to create the software package block and publish it on the Web Gateway. To achieve this run the following commands:

cd $BINDIR/tcmremed/download cd TCRZLSoftwareInstalled

$BINDIR/tcmremed/bin/sputil.sh -p Sample.properties

5.Verify the result of running the tool with the following command: wlookup -ar SoftwarePackage grep TCRZLSoftwareInstalled

If the package was created the result will look like below (the number in the middle of the resulting string will be different in your environment as it is meant to be unique and is associated with Tivoli Management Region number).

TCRZLSoftwareInstalled^1.0 1406765930.1.852#SoftwarePackage::Spo#

You may notice the three arguments passed with the ZoneAlarm installation file, which are flags /s /i /noreboot. They are explained below:

/i	This means that the software must be installed.
/s	This means that the process of installing/uninstalling must
	be silent, so there is no pop-up asking for user input.
/noreboot	This means that the workstation should not automatically
	reboot after the installation.

Depending on the technology, the installer for any particular software may use the flags in a different way, but we strongly recommend that the remediation

Chapter 8. Remediation subsystem implementation 433