5
Column 
Significance
Service Names of the service networks. You can specify service net- works for each LAN or CNA port, but not for profiles of type Rack Server. If you specify more than one service network for a port, the names must be separated by commas.
If you use the network selection box, the name of the chosen net- work is replaced in the Network column or added to the Service column depending on the type of the selected network.
Boot To configure the port as the boot device, select PXE boot, iSCSI boot, or SAN boot from the selection list. If you select disabled, this port is not a boot device. You can define up to four boot devices in a profile.
The values available in the selection list depends on type of port or function.
If you configure an iSCSI boot device or SAN boot device, you must specify additional boot settings in the Boot Parameter step.
5.4.4.4Boot Parameter step (Edit Server Profile wizard)
Boot Parameter is the next step in the Edit Server Profile wizard. In this step, you can modify the boot device configuration and the boot parameter order. This step is only shown if you configured a iSCSI boot or SAN boot or at least two channels as boot devices in the previous step of the Edit Server Profile wizard.
If you configured at least two channels as boot devices in the previous step, use the arrow up and arrow down buttons to change the boot order.
The selection you made at the second step (iSCSI boot or SAN boot) deter- mines which fields are displayed in this dialog box.
212 | ServerView |
