![](/images/new-backgrounds/1157354/157354351x1.webp)
5
in the same chassis that use the same network cannot communicate with each other, but only with an external device though the uplinks.
The column Isolate mode is not shown if the connection blade does not support isolate mode.
Delete
Deletes a selected VLAN networks from the list.
5.4.2 Edit Uplink Set wizard
You use the Edit Uplink Set wizard to modify an defined uplink set.
The Edit Uplink Set wizard comprises several dialog boxes to guide you through the individual steps. All required steps are displayed in the tree struc- ture on the left.
You modify an defined uplink using the Ext. LAN Connections tab. This tab contains two other tabs (Graphic and Details). To open the Edit Uplink Set wizard, click Edit on the Graphic or Details tab.
5.4.2.1Edit Properties step (Edit Uplink Set wizard - single/VLAN network) Edit Properties is the first step in the Edit Uplink Set wizard.
The type of the network determines which fields are displayed in this step.
176 | ServerView |