2.4 Defining networks (LAN) (for blade servers only)
If a blade server chassis is managed by VIOM, manual con- figurations (not done by VIOM) of an IBP connection blade are not supported. Manual configuration of IBP connection blades might result in incorrect behavior of VIOM or get lost during configuration by VIOM. Before managing a chassis by VIOM IBP connection blades should be set to factory default setting except IP address con- figuration of the administrative interface, user assigned name and access protocol (SSH or telnet).
By default, the IBP module (IBP 10/6) is supplied with the following con- figuration.
Figure 3: Standard configuration of the IBP module (10/6)
All uplink ports of the IBP module (IBP 10/6) are combined in one uplink set.
ServerView | 31 |
