4 Configuration
To check the parameter setting in the Web interface open the Com- ponents section and select System – System Unit. The System Infor- mation section on the right contains the option Automatic Inventory Retrieval. If the value of it is not set to automatic, please set it to auto- matic and remove and insert all blades or perform a
•To ensure that the blade server names in the ServerView server list are unique, you must assign a system name to the blade server chassis. System names are assigned when the management blade is configured.
4.2.3Configuring the I/O connection blades
The connection blades in fabric 1 and the optional connection blades in fabric 2 and 3 must be configured and connected to the local network so that they can be accessed from the central management station on which the Server- View Operations Manager and VIOM are installed.
You can configure the network parameters of an I/O connection blade using the
Configuration using the Web interface
It is important that the I/O connection blades of the BX400 can be accessed from the management station via their management port.
You can configure the network parameters of the management port of an I/O connection blade using the Web interface of the management blade.
114 | ServerView |
