11.4 Restoring
The Restore IBP function rewrites the configuration saved internally in the VIOM database to the IBP module.
In doing so, all the connections are interrupted momentarily, as all the network connections are reprogrammed in the IBP module.
The same applies if a defective IBP module is replaced. In this case, the Vir-
You restore the configuration as follows:
1.Carry out the base configuration (configure the IP parameters, system name of the IBP, …) of the connection blade. In addition, the IP con- figuration of the connection blade must have been read from the Server- View Operations Manager. This is done as part of a regular scan of the blade server chassis.
You may have to start the blade server chassis scan explicitly by selecting Explore in the context menu of the relevant blade server chassis in the server list of the ServerView Operations Manager.
2.Click Restore IBP on the Setup tab to write the configuration saved internally to the new connection blade.
11.4.2Deleting the configuration of an uninstalled IBP module
If an IBP module for which a configuration still exists has been removed from a chassis, the configuration remains in the internal database of the
This incorrect state is displayed on the Setup tab for the respective chassis with a corresponding state icon on the graphical display of the empty slot on the rear of the chassis. slot is empty is indicated as the state in State Cause for this slot.
You can delete the configuration you no longer need. You do this as follows:
1.Click the relevant slot in the graphical display on the rear of the chassis.
2.Then click the Delete Configuration button.
ServerView | 309 |
