12.3 Format of export files

FunctionConfiguration

optional

Specifies the configuration for a function (see " The Func- tionConfiguration element" on page 329). This element must be specified for functions and must not be specified for other IOChannelType.

12.3.5 The Address element

An Address element that specifies the E-MAC address of a CNA FCoE-func- tion must have the attribute purpose="fcoe". Each other Address element must have the attribute purpose="normal".

If it does not contain any elements, the VIOM Manager automatically assigns the virtual addresses according to the port type during the import.

A LAN port, CNA LAN-function, or CNA iSCSI-function may contain the VirtualMAC element whose value is the virtual MAC address.

An FC port may contain the VirtualWWNN and/or VirtualWWPN elements whose values are the corresponding virtual addresses. If only one of these two elements is specified, the VIOM Manager automatically assigns the other virtual address during the import.

A CNA FCoE-function may contain the VirtualMAC element additional to the elements of a FC port. If it is not specified, the VIOM Manager assigns the E-MAC address during import.

The ignoreRange attribute of the VirtualMAC, VirtualWWNN, and VirtualWWPN elements specifies whether the given virtual address is in the range that was specified when you installed VIOM. Possible values for this attribute are Yes (ignore the range) and No (check the range).

12.3.6 The BootEnvironment element

The BootEnvironment element contains the BootPriority element and one of the following elements:

PXEBootConfiguration

ISCSIBootConfiguration

ServerView Virtual-IO Manager

323

Page 323
Image 323
Fujitsu V3.1 Address element, BootEnvironment element, FunctionConfiguration, PXEBootConfiguration ISCSIBootConfiguration