5.4 Wizards
Column 
Significance
Network Name of the network. You can specify a network for each LAN or CNA port, but not for profiles of type Rack Server.
If you want to use the profile on blade servers with IBP modules, you can specify a network for each LAN or CNA port. If you work with blade servers that have
To enter a network name, click the table cell to switch to edit mode. You can also open a network selection dialog box via the "..." button. In it you can select a managed blade server chassis from the selection list. The networks defined for this chassis that are suitable for the selected port are then displayed. To select a network,
Make sure that the networks entered here are/will be configured before the profile is activated on the corresponding blade server.
As long as a network does not yet exist, the server profile can be created with this network, but cannot yet be assigned to a slot. If you wish to exit the network selection without selecting a network, click the Close button or another input field.
Tagged Names of tagged VLAN networks. You can specify tagged VLAN VLAN networks for each LAN or CNA port, but not for profiles of type
Rack Server. If you specify more than one tagged VLAN for a port, the names must be separated by commas.
If you use the network selection box, the name of the chosen net- work is added to the Tagged VLAN column if you use the Add tagged button.
ServerView | 193 |
