8 Defining network paths (LAN)
•VIOM always copies the entire configuration irrespective of what is selected in the tables.
•If the target IBP has fewer uplink ports than the source IBP, all uplink ports which does not exist on the target are removed from uplink sets.
8.5Copying configuration
You have the option of copying all defined uplink sets and networks of a chas- sis to another chassis. The following describes how to create a copy of all networks of a chassis on another chassis:
1.Activate the Ext. LAN Connections tab.
2.Click Copy Configurations.
3.In the Select Target Chassis dialog box, select the chassis to which the configuration should be copied and click OK.
After affirmation to overwrite the existing configuration, copying starts.
The source and the target chassis both should have the same IBP types in the same slots. Otherwise the copy will probably fail.
288 | ServerView |
