3Com MSR 50, MSR 30 manual Fundamental CE1/PRI Interface Configuration Commands

FUNDAMENTAL CE1/PRI INTERFACE

12 CONFIGURATION COMMANDS

cable

Syntax	cable { long short }
	undo cable
View	CE1/PRI interface view
Parameter	long: Indicates that the attenuation of receiver is -43 dB.
	short: Indicates that the attenuation of receiver is -10 dB.
Description	Use the cable command to set the cable type for a CE1/PRI interface.
	Use the undo cable command to restore the default.
	By default, the long keyword applies.
Example	# Set the cable length matching CE1/PRI interface E1 2/0 to short.
	<Sysname> system-view
	[Sysname] controller e1 2/0
	[Sysname-E1 2/0] cable short

channel-set (CE1/PRI interface view)

Syntax channel-set set-numbertimeslot-list list

undo channel-set [ set-number]

View CE1/PRI interface view

Parameter set-number: The number of the channel set formed by bundling timeslots on the interface, in the range 0 to 30.

timeslot-listlist: Specifies timeslots to be bundled. The list argument is timeslot numbers, in the range of 1 to 31. You may specify a single timeslot by specifying a number, a range of timeslots by specifying a range in the form of number1-number2, or several discrete timeslots by specifying number1, number2-number3.