3Com MSR 50, MSR 30 manual Portal server, Undo portal server server-name key port url, 2077

2077

portal server

Syntax portal server server-name ip ip-address [ key key-string port port-id url url-string ]

*

undo portal server server-name[ key port url ]

View System view

Parameter server-name: Name of the portal server, a case-sensitive string of 1 to 32 characters.

ip-address: IP address of the portal server.

key-string: Shared key required for communication with the portal server, a case-sensitive string of 1 to 16 characters.

port-id: Destination port ID used when the device sends a message to the portal server on its own, in the range 1 to 65534. The default is 50100.

url-string: Uniform resource locator (URL) to which HTTP packets are to be redirected, in the http://ip-addressformat. The default of ip-addressis the IP address of the portal server.

Description Use the portal server command to configure a portal server.

Use the undo portal server command to delete the specified portal server or restore the default.

By default, no portal server is configured.

Note that if the specified portal server exists but there is no user on the interface, the specified portal server will be deleted if no parameter is specified when the undo portal server command is executed. Otherwise, the port and url parameters, if specified, will be restored to the default values.

Related command: display portal server.

c CAUTION:

■The parameters of a portal server are modifiable. If the portal feature is enabled on an interface, the portal server applied to the interface cannot be deleted. If there are users on this interface, the parameters of the portal server cannot be modified.

■You must disable portal authentication on the interface before deleting the portal server applied to an interface in system view.

Example # Configure portal server pts, setting the IP address to 192.168.0.111, the key to portal, and the redirection URL to http://192.168.0.111/portal.