3Com MSR 50, MSR 30 manual Reset dlsw tcp, Syntax reset dlsw tcp ip-address, 359

359

Parameter None

Description Use the reset dlsw reachable-cachecommand to clear DLSw reachability information.

Example # Clear the DLSw reachability information.

<Sysname> reset dlsw reachable-cache

reset dlsw tcp

Syntax reset dlsw tcp [ ip-address]

View User view

Parameter ip-address: IP address of the remote peer.

Description Use the reset dlsw tcp command to reset the TCP connection between the DLSw router and a remote peer or all remote peers.

Note that:

■This command without ip-addressresets the TCP connections between the DLSw router and all current remote peers; otherwise, this command resets the TCP connection between the DLSw router and the specified remote peer.

■In the case of a manual configured remote peer, this command disconnects the current TCP connection, and initiates a new TCP connection request to establish new TCP connection.

■In the case of a remote peer dynamically learned, this command disconnects the current TCP connection and deletes the remote peer.

Example # Reset the TCP connections will all remote peers.

<Sysname> debugging dlsw tcp <Sysname> reset dlsw tcp

DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be deleted DLSW_TCP 4.4.4.3:Rebulid tcp with the peer

# Reset the TCP connection with a remote peer with the IP address of 4.4.4.2.

<Sysname> reset dlsw tcp 4.4.4.2

DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be deleted

Table 38 Description on the fields of the reset dlsw tcp command

Field Description

DLSw_TCP 4.4.4.2:The remote peer is learned dynamically,it will be deleted

The remote peer 4.4.4.2 was learned dynamically and will be deleted by DLSw.

DLSW_TCP 4.4.4.3 : rebuild tcp with the peer	The remote peer 4.4.4.3 was manually
	configured and therefore the TCP
	connection with it will be
	reestablished.