Chapter 4. Using Web Viewer
■Preset Setup
To save a desired location for the Pan/Tilt or Zoom/Focus operation along with detailed camera settings for the location, configure the following options.
Category | Description |
Number | Select a number to identify a preset. (Preset numbers 1 to 255 are available.) |
Name | Name a preset. |
Move | Moves to a selected preset when its number is selected. |
Edit | Enables detailed camera settings to be configured for a preset. |
| Saves a preset; move to a desired location for the Pan/Tilt or Zoom/Focus operation, |
Add | enter a preset number and name, and then press the Add button to save the location |
| as a preset. |
Delete | Deletes an existing preset; select a preset number, and then press the Delete button. |
Caution
•New settings are saved only if you click the 
button on the right of the screen. To configure detailed camera settings for a preset, select a preset number, and then move the
camera to the preset before pressing the
button.
■Sequence Setup
You can configure detailed sequence settings for each camera mode. Available camera modes are Swing, Group, Tour, Trace, and Auto Run, and they are described in the chart below.
Category | Description | |
Swing | Commands the camera to move between 2 selected presets, monitoring the | |
route. | ||
| ||
Group | Recalls groups of multiple preset locations consecutively. A group can contain up | |
to 255 presets. | ||
| ||
Tour | Recalls groups of presets consecutively in an orderly manner. Up to 6 groups can | |
be listed for this function. | ||
| ||
| Trace saves and reactivates patterns of custom camera movements. Up to 4 | |
Trace & Auto Run | movement patterns can be memorized. | |
Auto Run commands the camera to automatically perform a preset sequence | ||
| ||
| action if no command has been entered via the controller for a while. | |
|
|
4.2.2.1. Swing
■Swing Setup
Category | Description | ||
| Mode | 3 modes are available: Pan Swing, Tilt Swing, and P&T Swing. | |
Sequence | Pan Swing | Activates only the Pan operation for Swing monitoring. | |
Setup | Tilt Swing | Activates only the Tilt operation for Swing monitoring. | |
| P&T Swing | Activates both the Pan and Tilt operations for Swing monitoring. | |
First Preset |
| Select the first preset for a route consisting of 2 presets. | |
Second Preset | Select the second preset for a route consisting of 2 presets. | ||
Speed |
| Select the camera’s movement speed between the first and second presets. | |
| (Levels 1 to 64 are available.) | ||
|
| ||
DWT(Dwell Time) | Select the number of seconds to keep the PTZ camera on a preset location for | ||
monitoring. | |||
|
| ||
Caution
•New settings are saved only if you click the
button at the bottom of the screen.
The 
button operates the camera with the selected settings.
NETWORK PTZ CAMERA 62 User Guide | NETWORK PTZ CAMERA 63 User Guide |
