Chapter 4. Using Web Viewer
4.2.2.4. Trace & Auto Run
■PTZ Trace Setup
Category | Description | |
Trace No. | Up to 4 traces can be saved. | |
Replay | Replays a route saved by the Trace function. | |
Memorize | Pressing the Memorize button starts saving the route of the Pant/Tilt or Zoom/ | |
Focus operation automatically. | ||
| ||
Stop | During Replay mode, press the Stop button to abort the Trace operation. | |
During Memorize mode, press the Stop button to finish memorizing a route. | ||
|
■Auto Run Setup
Category | Description | |
Mode | 8 modes are available: OFF, HOME, Preset, Swing, Group, Tour, Trace, and A.Pan. | |
Time | Select time to activate Auto Run. (1 to 60 seconds and 1 to 60 minutes are | |
available.) | ||
| ||
| In the HOME and Preset modes, Number is used to set up preset numbers. | |
| In the Swing mode, Number is used to set up the Pan, Swing, and P&T modes. | |
Number | In the Group and Trace modes, Number is used to set up groups and trace | |
| numbers. | |
| In the A.Pan mode, Number is used to adjust the Pan speed. | |
Tilt Angle | Available only in the A.Pan mode; enables a tilt angle to be set up for the Pan | |
operation. | ||
| ||
Speed | Available only in the A.Pan mode; enables to set the Pan operation speed. |
Caution
•Pressing the Set, Clear, or Stop button aborts sequence action, for example, PTZ operations of the camera like Preset, Group, Tour, etc.
4.2.3. Config Page
The following page appears when selecting 
at the top of the screen. Buttons on the left side of the screen move to the relevant menu page.
4.2.3.1. Network
■Interface
LAN, xDSL, and DHCP options are available depending on your network environment.
Category | Description |
LAN | If the camera uses a static IP, enter the network information of the camera. |
|
|
xDSL | Enter the ID and password of your xDSL server. |
|
|
DHCP | Select this option when the camera receives an IP from a DHCP server. |
|
|
NETWORK PTZ CAMERA 66 User Guide | NETWORK PTZ CAMERA 67 User Guide |
