Chapter 3. Installing Camera & Network Setup
※To attach or detach the camera, refer to the picture.
*Attaching the Camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a "click".
*Detaching the Camera: To detach the camera, pull the camera downward while pushing up the unlock buttons on the camera.
Unlock Button
Unlock
To Attach the | To Detach the |
Camera | Camera |
3.7. Network Configuration & Connection via Website
Use these instructions if you are using a single
1.Connect the
Notes For the network settings, you must register the internal IP of your computer. To register the IP, go to My Network Environment → Properties → Local Area Connection → Properties.
Next, select Internet Protocol (TCP/IP) and click the "Properties" button below, then press "Advanced…" to set advanced options for your product.
•192.168.1.XXX as the internal IP of your computer. (XXX: 0 ~ 255)
Caution
•192.168.1.100 is the IP address for the camera and will be unavailable as the internal IP address for your computer.
NETWORK PTZ CAMERA 30 User Guide | NETWORK PTZ CAMERA 31 User Guide |