3Com MSR 30, MSR 50 manual Idle-cut, Ip pool, Domain aabbcc.net

1938 CHAPTER 127: AAA CONFIGURATION COMMANDS

idle-cut

Syntax	idle-cut { disable enable minute }
View	ISP domain view
Parameter	disable: Disables the idle cut function.
	enable minute: Enables the idle cut function. The minute argument refers to the
	allowed idle duration, in the range 1 to 120 minutes.
Description	Use the idle-cutcommand to enable or disable the idle cut function.
	By default, the function is disabled.
Related command:	domain.
Example	# Enable the idle cut function and set the idle threshold to 50 minutes for ISP
	domain aabbcc.net.
	<Sysname> system-view
	[Sysname] domain aabbcc.net
	[Sysname-isp-aabbcc.net] idle-cut enable 50

ip pool

Syntax	ip pool pool-number low-ip-address [ high-ip-address ]
	undo ip pool pool-number
View	System view, ISP domain view
Parameter	pool-number: Address pool number, in the range 0 to 99.
	low-ip-addressand high-ip-address: Start and end IP addresses of the address
	pool. Up to 1024 addresses are allowed for an address pool. If you do not specify
	the end IP address, there will be only one IP address in the pool, namely the start IP
	address.
Description	Use the ip pool command to configure an address pool for assigning addresses to
	PPP users.
	Use the undo ip pool command to delete an address pool.
	By default, no IP address pool is configured for PPP users.
	■ Configure an IP address pool in system view and use the remote address
	command in interface view to assign IP addresses from the pool to PPP users.