3Com MSR 30, MSR 50 ipx update-change-only, ping ipx

2550 CHAPTER 172: IPX CONFIGURATION COMMANDS
View Interface view
Parameter ticks: Delay in ticks, ranging from 0 to 30,000. One tick is 1/18 second
(approximately 55 ms).
Description Use the ipx tick command to specify a delay for sending IPX packets on the
interface.
Use the undo ipx tick command to restore the default.
By default, the delay on an Ethernet or a VLAN interface is 1 tick, that on an
asynchronous serial port is 30 ticks, and that on a synchronous serial port is 6 ticks.
Example # Configure the delay for sending IPX packets as 5 ticks on the interface Ethernet
1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx tick 5
ipx update-change-only
Syntax ipx update-change-only
undo ipx update-change-only
View Interface view
Parameter None
Description Use the ipx update-change-only command to enable the triggered update
feature on the current interface.
Use the undo ipx update-change-only command to disable the triggered
update feature on the current interface.
By default, the triggered update feature is disabled on an interface.
Example # Enable the triggered update feature on the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx update-change-only
ping ipx
Syntax ping ipx network.node [ -c count | -t timeout | -s size ] *
View Any view