3Com MSR 30, MSR 50 manual Ip redirects enable, Ip ttl-expires enable

798CHAPTER 60: IP PERFORMANCE CONFIGURATION COMMANDS

Example # Allow Ethernet 1/0 to forward directed broadcasts permitted by ACL 2001.

<Sysname> system-view

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] ip forward-broadcast acl 2001

ip redirects enable

Syntax	ip redirects enable
	undo ip redirects
View	System view
Parameter	None
Description	Use the ip redirects enable command to enable sending ICMP redirect packets.
	Use the undo ip redirects command to disable sending ICMP redirect packets.
	This feature is enabled by default.
Example	# Disable sending ICMP redirection packets.
	<Sysname> system-view
	[Sysname] undo ip redirects

ip ttl-expires enable

Syntax	ip ttl-expires enable
	undo ip ttl-expires
View	System view
Parameter	None
Description	Use the ip ttl-expires enable command to enable the sending of ICMP timeout
	packets.
	Use the undo ip ttl-expirescommand to disable sending ICMP timeout packets.
	Sending ICMP timeout packets is enabled by default.
	If the feature is disabled, the device will not send TTL timeout ICMP packets, but
	still send “reassembly timeout” ICMP packets.
Example	# Disable sending ICMP timeout packets.
	<Sysname> system-view
	[Sysname] undo ip ttl-expires