2176 CHAPTER 142: SSH2.0 CONFIGURATION COMMANDS

Example # Display the source IP address of the SFTP client.

<Sysname> display sftp client source

The source IP address you specified is 192.168.0.1

display ssh client source

Syntax display ssh client source

View Any view

Parameter None

Description Use the display ssh client source command to display the source IP address or source interface currently set for the SSH client.

If neither source IP address nor source interface is specified for the SSH client, “You didn’t specify the source” will be displayed.

Related command: ssh client source.

Example # Display the source IP address of the SSH client.

<Sysname> display ssh client source

The source IP address you specified is 192.168.0.1

display ssh server

Syntax display ssh server { status session }

View Any view

Parameter status: Displays the status information of the SSH server.

session: Displays the session information of the SSH server.

Description Use the display ssh server command to display the status information or session information of an SSH server.

Related command: ssh server authentication-retries,ssh server rekey-interval,ssh server authentication-timeout,ssh server enable, and ssh server compatible-ssh1x enable.

Example # Display the status information of the SSH server.

<Sysname> display ssh server status

SSH Server: Disable

SSH version : 1.99

SSH authentication-timeout : 60 second(s)

Page 2176
Image 2176
3Com MSR 30, MSR 50 manual Display ssh client source, Display ssh server, Syntax display ssh client source