3Com MSR 30, MSR 50 stp mode, stp no-agreement-check

615
Examples # Carry out mCheck on port Ethernet 1/1.
<Sysname> system-view
[Sysname] interface Ethernet 1/1
[Sysname-Ethernet1/1] stp mcheck
stp mode
Syntax stp mode { stp | rstp | mstp }
undo stp mode
View System view
Parameters stp: Configures the MSTP-compliant device to work in STP-compatible mode.
rstp: Configures MSTP-compliant device to work in RSTP mode.
mstp: Configures MSTP-compliant device to work in MSTP mode.
Description Use the stp mode command to configure the MSTP work mode of the device.
Use the undo stp mode command to restore the MSTP work mode to the
default setting.
By default, an MSTP-compliant device works in MSTP mode.
Related commands: stp mcheck, stp.
Examples # Configure the MSTP-compliant device to work in STP-compatible mode.
<Sysname> system-view
[Sysname] stp mode stp
stp no-agreement-check
Syntax stp no-agreement-check
undo stp no-agreement-check
View Ethernet interface view, port group view
Parameters None
Description Use the stp no-agreement-check command to enable No Agreement Check on
port(s).
Use the undo stp no-agreement-check command to disable No Agreement
Check on port(s).