3Com MSR 50 Info-center monitor channel, Info-center snmp channel, Undo info-center snmp channel

2439

info-center monitor channel

Syntax info-center monitor channel { channel-number channel-name}

undo info-center monitor channel

View System view

Parameter channel-number: Specifies a channel number, in the range 0 to 9.

channel-name: Specifies a channel name, which could be a default name or one that is defined by the user. The user needs to specify a channel name first before using it as a self-defined channel name. For more information, refer to “info-center channel name” on page 2432.

Description Use the info-center monitor channel command to configure the channel to output system information to the monitor.

Use the undo info-center monitor channel command to restore the default channel to output system information to the monitor.

By default, output of system information to the monitor is enabled with a default channel name of monitor and a default channel number of 1.

Note that the info-center monitor channel command takes effect only after the information center is enabled with the info-center enable command.

Example # Set to output system information to the monitor through channel 0.

<Sysname> system-view

[Sysname] info-center monitor channel 0

info-center snmp channel

Syntax info-center snmp channel { channel-number channel-name }

undo info-center snmp channel

View System view

Parameter channel-number: Specifies a channel number, in the range 0 to 9.

channel-name: Specifies a channel name, which could be a default name or one that is defined by the user. The user needs to specify a channel name first before using it as a self-defined channel name. For more information, refer to “info-center channel name” on page 2432.

Description Use the info-center snmp channel command to configure the channel to output system information to the SNMP NMS.